DISPOSAL

I
yyWxx

Environmental protection

Discarded electric appliances are recyclable and should not
be discarded in the domestic waste! Please actively support
us in conserving resources and protecting the environment
by returning this appliance to the collection centres.

yyWxx: Manufacturing date code; year of manufacturing (20yy) and week of
manufacturing (Wxx).

17
7

Manufacturer,Fabricant,Producent,
%%%%â€™ï¬%&ii&%â€˜;??@@%Ã©ï¬gâ€˜i@%?ï¬%}ï¬ï¬ï¬ï¬i&

5_41 ;â€˜7:â€˜Â« â€™c'\ï¬ va L pâ€˜v*;z.ki Z

SFD Limiled

ey â€™i Â»1-
T gVi:r"â€˜LJSL.J fâ€˜ 33 E\V l["

LASER METER WITH LEVEL SET

ITAN.

INSTRUCTION MANUAL

LASER SPIRIT LEVEL (LP11)

LASER DISTANCE METER (MK8-50)

Barcode: 3601652805172 c â‚¬

LASER METER WITH LEVEL SET
TITAN.

Thanks for your purchase of this TITANg product.

Read this instruction manual carefully before using the product. Familiarise
yourself with the operation, adjustments and functions of switches. Internalise
and follow the safety and operation instructions in order to avoid possible risks
and hazards.

Keep this instruction manual for future use. Should this product be passed on to
a third party, then this instruction manual must be included.

WARRANTY

2-years warranty coverage from product's purchase date.

The warranty covers appliance failures and malfunctions if the product is
used as intended and in accordance with the information provided in the
user's manual.

To bg covered under the warranty, proof of purchase is required (sales
receipt or invoice) and the product must include all its accessories.

The warranty clause does not cover deteriorations arising from normal
wear, lack of maintenance, negligence, defective assembly, or abnormal
use (impacts, non-compliance with the recommendations on power
supply, storage, conditions of use, etc.).

Adverse effects in the event of using non-original or unsuitable accessories,
or spare parts or dismantling or altering the appliance, are also excluded
from the warranty.

This guarantee does not affect your statutory rights.

LASER METER WITH LEVEL SET |

SAFETY INSTRUCTIONS

This product is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or by those who lack
experience and knowledge, unless they have been given supervision and
instruction concerning the use of the product by a person responsible for
their safety.

This product is not a toy and should not be used by children.

Keep the product away from children and pets.

Never use a damaged appliance! Do not attempt to repair the product
yourself. In case of malfunction, repairs are to be conducted by qualified
personnel only.

No liability will be accepted for damage resulting from improper use or
non-compliance with these instructions.

Do not open the product casing under any circumstances. Do not insert
any foreign objects into the inside of the casing.

Never use accessories which are not recommended by the manufacturer.
They could present a safety risk to the user and might damage the
appliance. Only use original parts and accessories. '

Do not operate the product in combustible areas such as in the presence
of flammable liquids, gasses or dust.

Warning! Do not immerse the electrical/optical parts of the product in water
or other liquids. Never hold the product under running water.

Â¢ Do not use the product in sunlight or similar bright lighting conditions.

Do not attempt to modify the product in any way to avoid possible laser
radiation hazard.

Avoid exposing the product to shock, continuous vibration or extreme hot
or cold temperatures. Damage to the tool and/or serious injury to the user
could result.

Do not point the laser beam at people or animals.

Do not look into the laser beam directly or through optical instruments.

SAFETY INSTRUCTIONS

Do not point the laser beam at reflecting surfaces that can reflect the beam
back towards the user.

While in use, mind the laser beam emission and standbys nearby in the
workplace to avoid any eye damage.

Do not place the product in a position that may cause anyone to stare
into the laser beam intentionally or unintentionally. Serious eye injury could
result.

Do not operate the laser product around children or allow children to
operate the tool. Serious eye injury could result.

Always turn the laser product off when not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
The operation of this product together with other optical instruments will
increase the harm to human eyes.

Do not touch the lens of the product.

Do not remove or deface any product labels. Removing product labels
increases the risk of exposure to laser radiation.

Handle the laser product with care. Treat it as you would any other optical
device such as a camera or binoculars.

When using the base (for model LP11 only), always ensure the laser meter
is securely seated. Damage to the tool and/or serious injury to the user
could result if the meter falls.

Battery warnings

Do not expose batteries to extreme temperatures, like direct sunlight or fire.

Do not place the product on any heat source. Leaking battery acid may
cause harm.

Always insert batteries correctly with regard to the polarities (+ and â€”)
marked on the battery and the battery compartment.

Caution! Danger of explosion if batteries are incorrectly replaced.

Replace batteries only with the same or equivalent type.

Do not mix old and new batteries or batteries of different types or brands.
If batteries should leak, remove them with a cloth from the battery
compartment. Dispose of batteries according to the regulations. If battery
acid has leaked avoid contact to skin, eyes and mucous membranes.
Rinse affected areas immediately after contact with the acid and wash with
plenty of clean water. Visit a physician.

LASER METER WITH LEVEL SET

SAFETY INSTRUCTIONS

Â¢ Swallowed batteries are lethal. Keep batteries out of reach of children and
pets. Immediately ask for medical assistance if a battery is swallowed.

Â¢ Do not allow children to replace batteries without adult supervision.

Â¢ Batteries shall be stored in well-ventilated, dry and cool conditions.

Remove the batteries if you will not be using the product for an extended

period of time.

Â» Danger of explosion! The batteries may not be charged, re-activated by

other means, disassembled, thrown into fire or short-circuited.

Exhausted batteries should be immediately removed from equipment and

properly disposed of.

'ï¬p' As a combination manuai of mode s LP11 and MK8-50,
_ some parts are universal, Model- spec&ï¬c parts are marked
ctearty throughout the manual

INTENDED USE

Model LP11 Model MK8-50

Instant measurement of distance,
area & volume.

Indirect measurement using
Pythagorean Theorem

Horizontal alignment: Align
picture frames or shelves.
alongside the horizontal laser line.
Vertical alignment: Align top and
base cabinets alongside the Continuous measurement
vertical laser line. Easy addition/subtraction of
Alignment of reference points: measurement

Align the laser line alongside your | * Max/Min measurement
reference points. Useful and convenient with wide
Laser point use together with a variety of applications in areas
tripod such as rooms, apartments,
Functioning as a spirit level: buildings, real estates, factories,
Check vertical and horizontal warehouses, gardens, roads,
lines. infrastructures, etc.

LASER METER WITH LEVEL SET

SCOPE OF DELIVERY

Model LP11 Model MK8-50

Laser distance meter (1x)

Pouch bag (1x)

Instruction manual (1x)

UNPACKING
* Remove all packaging materials and retain for future use.

hg â€˜materials are not toys. Children should
e packaging materials, as they pose a risk of
nd suffocation! ' - :

* Check for completeness and transport damage. In case of damages or
incomplete delivery, please contact your retailer (=Â» Guarantee).

LASER METER WITH LEVEL SET

PART LIST (FOR MODEL LP11)

ON/OFF switch for
laser line

QOutlet for laser
line

ON/OFF switch for
laser point

Quitlet for laser
point

Battery
compartment
cover

Magnets for laser
point

Magnets for laser
line

Aluminium base
face

Bubble for
vertical alignment

. Bubble for

horizontal
alignment

LASER METER WITH LEVEL SET

PART LIST (FOR MODEL LP11) USING THE METER (FOR MODEL LP11)
Iinserting batteries

needed (not supplied).
e Remove the battery compartment cover on the meterâ€™s bottom (Fig. 1A).
Â¢ Insert the batteries while observing the polarity markings on the batteries
and battery compartment (Fig. 1B).
Â¢ Close the battery compartment cover (Fig. 1C).

atteries, if the meter Is notto be used foran

batteries of same typo immeiately.

11. Metal surface for magnets 13. Hanging hole

12. Adjusting screw 14. M6.35x1.25 thread for tripod

LASER METER WITH LEVEL SET LASER METER WITH LEVEL SET
USING THE METER (FOR MODEL LP11) USING THE METER (FOR MODEL LP11)
Switching on/off

Â¢ Fix the meter to the multi-function
base using the magnets (Fig. 2).
Switching on the meter in line/point
operation: Set the corresponding
ON/OFF switch to ON.

Switching off the meter: Set the
corresponding ON/OFF switch to OFF.

* \ertical alignment: Hold the meter vertically.
â€” With this function, you can check if the cabinet top and base are upright
alongside the vertical laser line (Fig. 4A).
â€” While observing the vertical line, ensure to check if the bubble inside the
vertical spirit level is centered, instead of the one inside the horizontal spirit
level (Fig. 4B).

Laser line operation

* Horizontal alignment: Hold the meter horizontally.
â€” With this function, you can check if the picture frames or shelves are level
alongside the horizontal laser line (Fig. 3A).
â€” While observing the horizontal line, ensure to check if the bubble inside
the horizontal spirit level is centered, instead of the one inside the vertial
spirit level (Fig. 3B).

A -
â€”

LASER METER WITH LEVEL SET LASER METER WITH LEVEL SET
USING THE METER (FOR MODEL LP11) USING THE METER (FOR MODEL LP11)

* Alignment of reference points (Fig. 5): Turn the meter to a desired angle to Working with a tripod
project the laser line alongside your reference points. With this function, Â¢ Atripod offers a stable, height-adjustable measuring support.
you can check if the picture frames are parallel with stairs or the incline of * The multi-function base has a standard M6.35x1.25 thread for attaching
a roof. to a tripod (not included) (Fig. 7). This is ideal for levelling kitchen cabinets,
B \\\\\ , counter tops, window framing, and so on.

Laser point operation

* Rotate the upper part of the base, instead of the meter, to project the
laser point to the desired points on different surfaces to check if the points
are at the same height (Fig. 6A). Ensure to check if the bubble iinside the

horizontal spirit level is centered (Fig. 6B).

LASER METER WITH LEVEL SET LASER METER WITH LEVEL SET
USING THE METER (FOR MODEL LP11) PART LIST (FOR MODEL MK8-50)

Functioning as a spirit level

~ The meter can also be used as a carpenterâ€™s spirit level for checking vertical
and horizontal surface levelness. If the surface is level, the bubble inside the
spirit level will remain stably at the centre.

1. Switching off the meter: Set the two ON/OFF switches to OFF.

2. For each surface, ensure to follow the two steps as illustrated (Fig. 8). 1
2
3
4
5
6 --
7
1. Display 7. Wrist strap
2. Power on / 8. Pouch bag
oSt start measurement
3. D@ Area/volume measurement 9. (GO Exit/ power off
4. Ã© Pythagorean measurement 10. [%ï¬‚ Read stored data /
@ switch backlight on/off
5. +/- Addition/subtraction 11. Eï¬ Set measurement reference /
W unit conversion

6. Battery compartment cover 12. Laser emission outlet

LASER METER WITH LEVEL SET | LASER METER WITH LEVEL SET
PART LIST (FOR MODEL MK8-50) USING THE METER (FOR MODEL MK8-50)
Inserting batteries

1â€˜)
N e For operation of the meter, 2 x 1.5 V === batteries (Type: LRO3/AAA) are
r | T â€˜: needed (not supplied).
14â€” el E \ ' e Remove the battery compartment cover on the meterâ€™s bottom (Fig. 9A).
) ! ' Â¢ |nsert the batteries while observing the polarity markings on the batteries
15 | T i S e\~ g X | and battery compartment (Fig. 9B).
l : / ' â€˜-' 20 Â¢ Close the battery compartment cover (Fig. 9C).
16â€” I i ] = n
L cemmmec e e e, â€” - - a O
w, W, w, I~V
L Lo
LI m = |+
o
- w, W 7w~V
e LU LELE LS
L .' L'IL'I .'l,.' m | 4 _â€”
Lanoongâ€ Â¥
; CULALLLALLY m
- w ' o\
LILILILIll s
- â€˜el e o o â€˜o ] ,
S AALAGLLLAY m e
o o Use batteries of high quality only. Batteries of low quality
a 'a'l'aâ€™l'ailâ€™asa might leak and cause damage.
* Remove the batteries, if the meter is not to be used for an
13. Measurement mode icon 18. Master measurement data extended period of time, as it might be damaged by a leaking
battery.
14. Battery level icon 19. Auxiliary measurement data Â« I the meter does not work properly or the low battery
15. Laser emission icon 20. Stored data icon z;ï¬‚n r':eb(;iis t::lown, replace with new batteries of same
pe immediately.

16. Measurement reference icon

17. MIN/MAX icon

LASER METER WITH LEVEL SET LASER METER WITH LEVEL SET
USING THE METER (FOR MODEL MK8-50)

Using buttons for basic functions

USING THE METER (FOR MODEL MK8-50)
Using buttons for measurement

Button | Descriptions
m Press 1x: Switching on the laser function and entering standby.
DIST Press 2x: Start measurement.
Press quickly: Entering measurement based on cumulative
+/- " .
addition or subtraction.
Press 1x: Pre-reference Ht
Press 2x: Post-reference {
I
UNITS
Press 3x: Extended reference I
J

Press quickly: Recalling stored measurement data.

Press and hold: Switching on/off backlight of the display.

Press quickly: Exiting the current mode and returning to standby.

Press and hold: Switching off the meter.

LASER METER WITH LEVEL SET

Button Measurement mode & Indicator Descriptions
Single Press once to
measurement | switch on the laser

function and enter
standby.

..... m Press again while
aiming at the
target to start
measurement.

Continuous Press button
measurement | continuous to
start continuous
DIST Maxand measurement;
Min values in
continUoOUS For dimension
measurement selected for a
fixed position, use
MIN the continuous
measurement to
find the point of
MAX desired distance
or to find the Max
and Min values.
Rectangular Press to select
area area measurement
measurement | mode or
cubic volume

D@ D measurement
Cubic volume mode.
measurement | press G button

E repeatedly to get
measurements.

LASER METER WITH LEVEL SET

USING THE METER (FOR MODEL MK8-50)

]
|~

Button Measurement mode & Indicator Descriptions
Triangle area Press to select
measurement | triangle area

\ measurement
mode.

/ Press button
repeatedly to
measure the
3 sides of the
triangle, and thus
the area of it.

Right Press to select
trapezoidal right trapezoidal
area area measurement

] measurement | mode.

Press %se button
repeatedly to
measure the

3 sides of the
trapezoidal, and
thus the area of it.

USING THE METER (FOR MODEL MK8-50)

Accumulative
area
measurement

Press to select
accumulative area
measurement
mode.

Press button
repeatedly

to get the
measurements.

Notes:

Â» Under the triangle area measurement mode, ensure the 3 points are
correctly located when placing the meter.
e Under the right trapezoidal area measurement mode, ensure the 3 sides
to be measured are mutually perpendicular.

Button Measurement mode & Indicator Descriptions
Pythagorean Press to enter
theorem corresponding
measurement | Pythagorean
theorem
measurement

Dual mode.

Pythagorean | press 43 button

measurements.

Dual

Pythagorean

theorem -

measurement

Error codes

Error code ;| Possible tause Solution

Emo1 Reflected laser signal too Change to another target or

strong. place a piece of white paper

Err03 Reflected laser signal too on the target.

weak.

Em02 Measurement beyond the Measure within the effective

effective working range. working range.

Em06 Low battery Replace with new batteries.

LASER METER WITH LEVEL SET

TROUBLESHOOTING

Problem

Possible cause

Solution

Meter cannot
start.

Batteries incorrectly
inserted.

Re-insert batteries correctly
(= Inserting batteries).

Low battery

Replace with new batteries.

Laser line hard
10 see.

Light in area is too
bright.

Use in dimmer area.

CLEANING AND CARE
e After cleaning, iet all parts dry well.

Â¢ Protect the lens from dust or scratches. Treat the optical parts the same

way as spectacles and cameras.
e Store the product in its original package, away from children and pets.
o For MK8-50 meter, store it in the supplied pouch bag.

TECHNICAL DATA

Meter ticks during
use (for MK8-50).

This is normal, indicating the meter's inner
mechanism is working during measurement.

Model number

Laser line not level
(for LP11).

Level bubbles not
properly aligned.

Make sure level bubbles are
centred.

Power supply

include)

Batter set life

< 5000 measurements

Meter is mounted on
an uneven base.

Make sure levelling bubbles
are level after mounting.

t aser class

Class Il

Laser line is
horizontal while

a vertical line is
desired (for LP11).

Laser meter is in the
incorrect position.

Turn the meter 90Â° to the
vertical orientation.

Laser type

650 nm, <1 mW

635 nm, < 1T mwW

Working range

5 m (Laser ling)

20 m (Laser point)

0.05-850m

CLEANING AND CARE

* Always switch the meter off before cleaning and carel.
Â» When cleaning, ensure no water enters the product.
Â» Never use corrosive or volatile cleansers for cleaning.

Parts

How to clean...

Casing

Â¢ Clean with a slightly damp cloth.

Optical parts (e.g.
laser lens)

Â¢ Clean with a soft cloth or cotton bud slightly
moistened with distilled water or alcohol.

Measuring + 1.0 mm/m (spirit level) | Â£ 2 mm, at incremen't of
accuracy 0.05 mm/m
Working temp. | 5-40Â°C 0-40Â°C
Dimensions 159 x 36 x 25 mm 122 x 52 x 26 mm
(LxW xH)
Weight 100 g 105 Â¢
Auto-off / 20 sec (Laser)
5 min (Meter)
Data records / < 50 records

LASER METER WITH LEVEL SET